ANSI 5032LC Battery, ANSI 5032LC Digital Camera Battery

1. Exercise the ANSI 5032LC Digital Camera Battery
   Do not leave the replacement ANSI 5032LC battery dormant for long periods of time. We recommend using the digital camera battery at least once every two to three weeks. If a battery has not been used for a long period of time, perform the new battery break in procedure described above.
2. Prevent the 5032LC Battery Memory Effect
   Keep the battery healthy by fully charging and then fully discharging it at least once every two to three weeks.
3. Keep the 5032LC Batteries Clean
   It's a good idea to clean dirty battery contacts with a cotton swab and alcohol. This helps maintain a good connection between the battery and the portable device.
4. ANSI 5032LC Battery Kits Storage
   If you don't plan on using the battery for a month or more, store it in a clean, dry, cool place away from heat and metal objects. Li-ion batteries will self-discharge during storage; remember to recharge the ANSI digital camera batteries before use.

• A new ANSI 5032LC Digital Camera Battery usually maintains a discharged condition with very low capacity. It is highly recommended to fully charge new 5032LC battery packs before using. You can refer to the users' guide of your electronic device for charging instructions.
• A new ANSI 5032LC pack needs to be circled (fully discharged and recharged) three to five times to reach its optimum performance.
• Rechargeable ANSI 5032LC battery will undergo self-discharging when left unused for a long period of time. Thus, it should always be stored in a fully charged state and kept in a cool, dry and clean place.
• To maintain the optimum performance of a ANSI 5032LC battery pack, it is highly recommended to circle (fully discharging and recharging) it at least once a month.
• It is normal if a new 5032LC battery gets warm when being charged or used. However, please pay special attention if the ANSI battery 5032LC digital camera pack becomes excessively hot. This may indicate there is a problem with the charging circuit of the electronic device. Please consult a qualified technician if necessary.
• New ANSI 5032LC Digital Camera Battery are hard to be charged. Sometimes, your electronic device may indicate a fully charged condition about 10 to 15 minutes when the new battery pack is being charged for the first time. When this happens, remove the battery pack and let it cool down for about 10 to 15 minutes then repeat the charging procedure. Sometimes, a new ANSI 5032LC battery will suddenly refuse to be charged. If this happens, it is then suggested to remove the ANSI 5032LC battery from the device and reinsert it.
• ANSI 5032LC Digital Camera Battery Instruction Manual