SHARP AD-T50BT Battery, SHARP AD-T50BT Digital Camera Battery

• A new SHARP AD-T50BT Digital Camera Battery usually maintains a discharged condition with very low capacity. It is highly recommended to fully charge new AD-T50BT battery packs before using. You can refer to the users' guide of your electronic device for charging instructions.
• A new SHARP AD-T50BT pack needs to be circled (fully discharged and recharged) three to five times to reach its optimum performance.
• Rechargeable SHARP AD-T50BT battery will undergo self-discharging when left unused for a long period of time. Thus, it should always be stored in a fully charged state and kept in a cool, dry and clean place.
• To maintain the optimum performance of a SHARP AD-T50BT battery pack, it is highly recommended to circle (fully discharging and recharging) it at least once a month.
• It is normal if a new AD-T50BT battery gets warm when being charged or used. However, please pay special attention if the SHARP battery AD-T50BT digital camera pack becomes excessively hot. This may indicate there is a problem with the charging circuit of the electronic device. Please consult a qualified technician if necessary.
• New SHARP AD-T50BT Digital Camera Battery are hard to be charged. Sometimes, your electronic device may indicate a fully charged condition about 10 to 15 minutes when the new battery pack is being charged for the first time. When this happens, remove the battery pack and let it cool down for about 10 to 15 minutes then repeat the charging procedure. Sometimes, a new SHARP AD-T50BT battery will suddenly refuse to be charged. If this happens, it is then suggested to remove the SHARP AD-T50BT battery from the device and reinsert it.
• SHARP AD-T50BT Digital Camera Battery Instruction Manual